Plastidip Liquid Rubber Orange Fluorescent (429ml)

Liquid paint canister PLASTI DIP, in orange Fluorescent (Blaze) matte color. Contains 429ml of paint (USA format).

This paint is used to cover objects and protect them from inclement weather (water), UV rays, etc. Once dry it remains flexible and completely odorless.

It's waterproof.

The PLASTIDIP paints, once dry, can be removed by pulling them, as if it were a thin adhesive film. We do not need to sand the piece or use any type of solvent for the & quot; unpainted & quot;.

PLASTIDIP soft rubber forms a protective rubber layer, very useful for sealing, damping and framing. It is also used as an anti-slip product. Recommended for use both indoors and outdoors as it withstands extreme temperatures from -34 ° C to 93 ° C. It is also resistant to acids, alkalis, salts, oils, as well as as a lot of chemical agents.

It does not contain silicone and once dry, it can be easily removed.
Adheres especially on metals, wood, plastic, glass, fabrics, wool, stone, glass or carbon fibers, etc. To increase its adhesion we can use the primer product designed for the PlastiDip soft rubber.

& iquest; How should we apply Plastidip gum?

The surface to be protected must be dry, clean, and free of substances that hinder its adhesion. Before opening the bottle and applying the product, shake gently and open. We must let it rest a few minutes to avoid air bubbles.

We can apply the PLASTIDIP paint using a brush or brush, although we can also spray it or we can work by immersing it by dipping the piece directly into the paint canister.
To spray it, we need to dilute the paint using the specific solvent for PLASTIDIP.

To achieve a good finish when painting by spraying, we have to paint based on giving thin layers (4 to 6 layers on average), leaving a minimum drying time between layers, of about 10 minutes. / p>

In the case of spraying, we recommend the use of electric guns (or so-called turbine pistols).

Being a fluorescent color, we will need that the base on which we apply this color is white or more similar to white. If it's not like that, we will not achieve the intensity expected in the colors of the BLAZE range, fluorescent.
& nbsp;

Technical information on PLASTI DIP painting:

- Stable at temperatures between -34 ° C and 93 ° C.
- Best application temperature, around 20 ° C.
- Minimum drying time on contact. 5 min approx.
- Complete drying time: 1 hour, depending on the thickness and the number of layers applied.
- The manufacturer recommends layers of 0.2mm thickness, which will require 150gr of product per m2.