Plastidip Liquid Gum Matte White (429ml)

PLASTI DIP liquid paint can, in matte white. Contains 429ml of paint (USA size).

This paint is used to coat objects and protect them from inclement weather (water), UV rays, etc. Once dry, it remains flexible and completely odorless.

It's waterproof.

Once dry, PLASTIDIP paints can be removed by simply peeling them off, like a thin adhesive film. There's no need to sand the piece or use any solvents for the removal.

PLASTIDIP liquid rubber forms a protective, rubbery layer, ideal for sealing, cushioning, and framing. It is also used as an anti-slip product. Recommended for both indoor and outdoor use, it withstands extreme temperatures from -34°C to 93°C. It is also resistant to acids, alkalis, salts, oils, and many other chemicals.

It does not contain silicone and once dry, it can be easily removed.
It adheres especially well to metals, wood, plastics, glass, fabrics, wool, stone, fiberglass or carbon fibers, etc. To increase its adhesion, you can use the primer product designed for PlastiDip liquid rubber.

How should we apply Plastidip liquid glue?

The surface to be protected must be dry, clean, and free of any substances that may hinder adhesion. Before opening the container and applying the product, shake gently and then open it. Let it rest for a few minutes to avoid air bubbles.

We can apply PLASTIDIP paint using a brush, although we can also spray it or work by immersion by submerging the piece directly into the paint can.
To spray it, we need to dilute the paint using the specific solvent for PLASTIDIP.

To achieve a good finish when spray painting, we need to paint by applying thin layers (4 to 6 layers on average), leaving a minimum drying time between each layer, of about 10 minutes.

If spraying, we recommend using electric spray guns (also called turbine spray guns).

Technical information on PLASTI DIP paint:

- Stable at temperatures between -34ºC and 93ºC.
- Optimal application temperature, around 20ºC.
- Minimum drying time upon contact: approx. 5 min.
- Complete drying time: 1 hour, depending on the thickness and number of layers applied.
- The manufacturer recommends layers of 0.2mm thickness, which will require 150gr of product per m2.