Plastidip Pearl Brightening Finish Effect (3Kg / 3.78L) Ready Spray

3Kg / 3.78L bottle, made of Plasti Dip paint, in Brilliant Pearl color, ready to spray (Sprayable).

The & quot; Effects & quot; Plasti Dip allow us to obtain different finishes and tones to the Plasti Dip paints, so require that the base is basically Plasti Dip . You can not use the range of & quot; effects & quot; Plasti Dip on a surface that has not been previously coated with basic Plasti Dip colors.

In this case, the & quot; Pearl Brilliance effect & quot; will give us, as the name suggests, a pearly tone with a shiny finish.

This product comes ready to be pulverized (Sprayable), since it already contains the necessary solvent.

Its application is as easy as opening the bottle, mixing the product well, pouring it into the tank of the gun that we are going to use, and spraying it on the surface previously painted with some basic Plasti Dip color.

The liquid protective rubber Plasti Dip is used to cover objects and protect them from inclement weather (water), UV rays, etc.

Once dry it remains flexible and completely uncoloured. It's waterproof.

The liquid rubber Plasti Dip forms a protective layer of rubber very useful for sealing, cushioning and framing. It is also used as an anti-slip product. Especially recommended for indoor and outdoor use as it withstands extreme temperatures, from -34ºC to 93ºC. It is also resistant to acids, alkalis, salts, oils, as well as to many chemical agents.

It does not contain silicone and once dry, it can be easily removed, pulling it as if it were a vinyl.

Especially adherent to metals, wood, plastics, glass, fabrics, wool, stones, glass or carbon fibers, etc. To increase its adhesion we can use the specially designed primer product for the liquid rubber Plasti Dip.

How to use:

- The surface to be protected must be dry, clean, and free of substances that hinder its adhesion. Before opening the bottle and spraying the product, shake gently. We must let it rest a few minutes to avoid air bubbles.

- We must apply several layers of Plasti Dip basic paint, leaving a minimum recommended drying time of about 15 min. between each layer (application at about 20º of room temperature), to later pulverize the layers that we want of this Effect Metal Gold Shiny Plasti Dip and to modify thus the initial color. The greater number of layers we give, the greater the saturation of the effect.

Technical information:

- Stable at temperatures between -34ºC and 93ºC.
- Optimum application temperature, around 20ºC.
- Minimum drying time on contact. 10 minutes. approx.
- Complete drying time: 1 hour, depending on the thickness and the number of layers applied.
- The manufacturer recommends layers of 0.2mm thickness, which will require more or less 150gr of product per m2.