Plasti Dip Smoke Multi-Purpose Rubber Coating 400ml

Plasti Dip - Protective and water resistant liquid gum, in this case, in 400 ml spray can format, in smoked effect color.

The Plasti Dip smoky effect contains a special formulation of the Plasti Dip paint in translucent Gray-Black color.

This smoky effect changes gradually as we give layers of product, on the piece or surface in question. Each additional layer obscures the finish of the piece or surface on which we spray. From a gray tone to an almost black tone.

Once dry, it remains flexible and completely odorless. It's waterproof.

Plasti Dip liquid rubber is a very useful rubber protective layer for sealing, damping and framing. It is also used as an anti-slip product. Especially recommended for indoor and outdoor use as it withstands extreme temperatures, from -34ºC to 93ºC. It is also resistant to acids, alkalis, salts, oils, as well as to many chemical agents.

It does not contain silicone and once dry, it can be easily removed.

Especially adherent to metals, wood, plastics, glass, fabrics, wool, stones, glass or carbon fibers, etc. To increase its adhesion we can use the specially designed primer product for the liquid rubber Plasti Dip.

How to use:

The surface to be protected must be dry, clean, and free of substances that hinder its adhesion. Before opening the bottle and spraying the product, shake gently. We must let it rest a few minutes to avoid air bubbles.
We must apply several layers of paint, leaving a minimum recommended time of drying, about 10 minutes. between each layer.

Technical information:

Stable at temperatures between -34ºC and 93ºC.

Optimal application temperature, around 20ºC.
Minimum drying time on contact. 5 min approx.

Complete drying time: 1 hour, depending on the thickness and the number of layers applied.
The manufacturer recommends layers of 0.2mm thickness, which will require more or less 150gr of product per m2.