Plastidip Liquid Vinyl Orange Fluorescent Cone

Plastidip bottle spray, 311gr, orange Fluorescent Cone.

It is imperative that the base color, before spraying this fluorescent color (Blaze range), be white.

In addition, we recommend a lot of attention with BLAZE colors, because they lose a lot of intensity when applied to surfaces that are very exposed to the sun, given their low light fastness.

This paint is used to cover objects and protect them from inclement weather (water), UV rays, etc.

Once dry it remains flexible and completely odorless. It's waterproof.

PlastiDip Liquid Rubber is a very useful rubber protective layer for sealing, damping and framing. It is also used as an anti-slip product. Especially recommended for indoor and outdoor use as it withstands extreme temperatures, from -34 ° C to 93 ° C. It is also resistant to acids, alkalis, salts, oils, as well as like a lot of chemical agents.

It does not contain silicone and once dry, it can be easily removed.

Especially adherent to metals, wood, plastic, glass, fabrics, wool, stones, glass or carbon fibers, etc. To increase its adhesion we can use the specially designed primer product for the PlastiDip soft rubber.

How to use:
The surface to be protected must be dry, clean, and free of substances that hinder its adhesion. Before opening the bottle and spraying the product, shake gently. We must let it rest a few minutes to avoid air bubbles.
We must apply several layers of paint, leaving a minimum recommended drying time of about 10 minutes. between each layer.

Technical information:
Stable at temperatures between -34 ° C and 93 ° C.
Best application temperature, around 20 ° C.
Minimum contact drying time. 5 min approx.
Complete drying time: 1 hour, depending on the thickness and the number of layers applied.
The manufacturer recommends 0.2mm thick layers, which will require more or less 150gr of product per m2.