Plasti Dip Multi Purpouse Rubber Coating Orange Blaze

Plasti Dip Multi Purpouse Rubber Coating Orange Blaze

It is imperative that the base color, before spraying the fluorescent color (Range Blaze), is white.

In addition, we recommend attention to the colors BLAZE, as they are not suitable for surfaces where they much sun, because of its low lightfastness.

This paint is used to coat objects and protect them from the weather (water) of the UV rays, etc.

Once dry it remains flexible and completely odorless. It is waterproof.

Plasti Dip liquid rubber is very useful for sealing, cushioning and protective layer rubber frame. It is also used as anti-slip product. Especially recommended for use indoors and outdoors as it supports extreme temperatures from -34 ° C to 93 ° C. It is also resistant to acids, alkalis, salts, oils, as well as very many chemicals.

Does not contain silicone and once dry, it can be removed easily.

Especially adherent to metal, wood, plastics, glass, cloth, wool, stones, glass fibers or carbon, etc. To increase adherence we can use the primer specially designed for Plasti Dip liquid rubber.

How to use:
The surface to be protected must be dry, clean, and free of substances that hinder adherence. Before opening the bottle and spray the product, stirring gently. We let it sit a few minutes to avoid air bubbles.
We apply several coats of paint, allowing a minimum recommended drying time of approximately 10 min. between each layer.

Technical information:
Stable at temperatures between -34 and 93 ° C.
Optimal application temperature, about 20 ° C.
Minimum drying contact. 5 min. approx.
Complete drying time: 1 hour, depending on the thickness and number of layers applied.
The manufacturer recommends layers of 0.2mm thick, requiring more or less 150g of product per m2.