Plasti Dip Goma protectora en Spray AMARILLO FLUOR mate

Plasti dip spray bottle, 400ml, in Fluorescent Yellow color.

It is essential that the base color, before spraying this fluorescent color (BlazeNeon Range), be white.

In addition, we recommend a lot of attention with the BLAZE colors, because they are not suitable for surfaces where the sun is too much, given its low light fastness.

This paint is used to cover objects and protect them from the inclemency of the weather ( water), UV rays, etc.

Once dry it remains flexible and completely odorless. It is waterproof.

Liquid rubber Plasti Dip is a rubber protective layer very useful for sealing, cushioning and framing. It is also used as an anti-slip product. Especially recommended for indoor and outdoor use as it withstands extreme temperatures, from -34ºC to 93ºC. It is also resistant to acids, alkalis, salts, oils, as well as to many chemical agents.

It does not contain silicone and once dry, it can be easily removed.

Especially adherent to metals, wood , plastics, glass, fabrics, wool, stones, glass or carbon fibers, etc. To increase its adhesion we can use the product of primer specially designed for liquid rubber Plasti Dip.

How to use:
The surface to be protected must be dry, clean, and free of substances that hinder its adherence . Before opening the bottle and spraying the product, shake gently. We must let it rest a few minutes to avoid air bubbles.
We must apply several layers of paint, leaving a minimum recommended time of drying, about 10 minutes. between each layer.

Technical information:
Stable at temperatures between -34ºC and 93ºC.
Optimum application temperature, around 20ºC.
Minimum drying time on contact. 5 min approx. Full drying time: 1 hour, depending on the thickness and number of layers applied.
The manufacturer recommends 0.2mm thick layers, which will require more or less 150gr of product per m2.